[ Contents | Search | Post | Reply | Next | Previous | Up ]
From: Jake Zimmer
Category: Balsa structures in general
Remote Name: 4.225.208.38
Date: 27 Jan 2005
Time: 04:04:58 PM
For you first time DI'ers out there, I've got a box of scrap sticks that may be of some interest. There are hundreds of 1/8 inch sticks + an assortment of other sizes. Usually they are used for RC model aircraft but I thought I would mention that they are available. The price including shipping and handling is an even $70.00. The box has about 20+ pounds of balsa inside and measures 50x19x10 inches. I am also thinking of test marketing 1/8" square laser cut sticks that should be at or below the .130 inch size. My laser cutter is 24 inches long. If you need them 36 or 48 inches long laser cut sticks the price would be higher since I would have to have them cut by a friend who has a 48 inch laser cutter. I do have a stick sander that works for sanding conventional oversized sticks to exact sizes but the cost is about $30.00. If anyone is interested in any of the above options email me at jrzimmer@ix.netcom.com Attn: Jake Zimmer