Balsa Wood Structure Discussion Page

[ Home Page | Search | Post | Reply | Next | Previous | Up ]

Re: not to exceed the structures hight

Category: OotM
Remote Name:
Date: 01 Mar 2004
Time: 03:53:25 PM


how could the supports extend past the 8x8x1.5 if the width requirement is going to be checked by flipping the structure upside down and putting it on top of the 8x8x1.5 board rather than having the board on top of the structure which may prove fatal to some team's structures. Unless they had the board without anything to its sides, almost free standing, of course then the structure must rest on the board since the legs will not be able to support the structure.

Last changed: 07/16/05