Balsa Wood Structure Discussion Page

[ Home Page | Search | Post | Reply | Next | Previous | Up ]


Re: not to exceed the structures hight

From:
Category: OotM
Remote Name: 4.13.210.31
Date: 29 Feb 2004
Time: 10:02:08 PM

Comments

no, this limitation " must not exceed the height of the structure" was referring to when the board of 8x8x1/2 size was placed on top of the structure that the board itself must not be higher then the structure. In other words it must fit far enough down in the structure such that the columns or the supports of the structure are atleast as high off the ground as the top of the board


Last changed: 07/16/05